Rocktron Chameleon On-Line - Manual (Page 25)

22
PHASER Function
The PHASER function is available only in configurations displaying "PHAS" in the configuration title.
Phase shifting involves splitting the input signal into two signals, then shifting the phase of different frequencies
of one signal and mixing it back with the original signal.
The PARAMETER SELECT control will allow you to access these PHASER parameters:
The PHASER IN/OUT parameter determines whether the Phaser is active for the current
preset.
The DEPTH parameter determines the modulation depth of the phase shift effect. Higher
parameter settings result in the sweep of the filtering effect occurring over a wider
frequency range.
The RATE parameter determines the speed at which the phase shifted signal is modu-
lated.
The RESONANCE parameter adds feedback to the Phaser so that it has a more pro-
nounced effect.
The STAGES parameter determines how many stages of phase shift are to be active. A
parameter setting of "4" produces a result similar to a vintage Phase 90, while a setting of
"6" emulates other phaser pedals.
PHASER I/O
DEPTH
RATE
RESONANCE
STAGES