Rocktron Chameleon On-Line - Manual (Page 95)

92
Restoring all factory presets:
!! CAUTION !!
This procedure will permanently erase all user presets (1-254)
and replace them with the original factory presets. If you
have altered and stored presets which you do not want to
erase, do not perform the following procedure. Step 1
Turn the FUNCTION SELECT control clockwise to "FACTORY RESTORE". Step 2
Turn the PARAMETER SELECT control two steps clockwise to "ALL RESTORE 0".
A specific code number must be entered to restore the Chameleon memory. Use the PARAMETER
ADJUST control to enter the number "243". Step 3
1 3 4 2
ALL RESTORE 0
FACTORY RESTORE
ALL RESTORE 243
! ! WARNING ! !
Pressing the STORE button at this time will permanently erase all user
presets and replace them with the original factory presets. If you have
altered and stored presets which you do not want to erase, turn the