Rocktron Chameleon On-Line - Manual (Page 87)

84
MIDI Dump/Load
Any or all of the Chameleon presets may be dumped to a sequencer or another Chameleon via system exclusive
messages. The information exchanged when performing a MIDI Dump consists of parameter values, title characters and
controller assignment/limit information. When dumping a single preset into another Chameleon, the dumped preset may be
loaded into any preset location on the receiving Chameleon.
To dump a single Chameleon preset into another Chameleon:
IMPORTANT: Do not allow a looping connection from the MIDI OUT/THRU of the receiving
Chameleon back to the MIDI IN of the transmitting Chameleon.
Connect a standard MIDI cable from the MIDI OUT of the transmitting Chameleon to the MIDI IN on
the receiving Chameleon. Step 1
Turn the FUNCTION SELECT controls on both the transmitting and receiving Chameleons until
"MIDI DUMP/LOAD" is displayed on each. Step 2
Step 3 Turn the PARAMETER SELECT control on each unit one step clockwise to "PR DUMP/ LOAD".
MIDI DUMP/LOAD MIDI DUMP/LOAD
1 PR DUMP/LOAD 1 PR DUMP/LOAD