Rocktron Chameleon On-Line - Manual (Page 93)

90
Factory Restore
The Factory Restore function allows you to restore altered Chameleon presets to their original condition as shipped from
the factory. Either the entire Chameleon memory can be restored, a single preset can be restored to any preset location, or
the controller information alone can be restored.
Restoring a single factory preset:
Turn the FUNCTION SELECT control clockwise to "FACTORY RESTORE". Step 1
Turn the PARAMETER SELECT control one step clockwise to "RESTR 1 TO 1". The number on the
left is the original factory preset number to be restored. The number on the right is the preset
location that the preset will be stored into. Step 2
Turn the PRESET control to select the factory preset to be restored.
Turn the PARAMETER ADJUST control to select the preset location to store the restored preset
into.
Step 3
Step 4
4 5 1 2 3
FACTORY RESTORE
RESTR 1 TO 1
Factory preset
to be restored Preset location
to store into
RESTR 98 TO 1
RESTR 98 TO 22