Rocktron Chameleon On-Line - Manual (Page 8)

5
8 PARAMETER ADJUST control
This control is used to adjust a displayed parameter value. When the parameter is
changed from its original value, the LED above the STORE button will light until either
the new value is stored, a new preset is selected or the parameter is returned to its
original value.
9 STORE button/led
This button is used to store values into the Chameleon memory when altered. See "Storing
Changed Preset Parameters" for more information on this procedure.
10 PARAMETER SELECT control
When adjusting parameter values, this control will scroll through the available param-
eters under the current function heading.
In the "Title Edit" function, this control will scroll through the character locations to be
edited.
11 FUNCTION SELECT control
This control allows access to each function of the Chameleon, depending on what configu-
ration is currently recalled.
12 SPEAKER SIMULATOR indicator
When lit, this LED indicates that the Speaker Simulator is activated for the current preset.
13 OUTPUT LEVEL control
This control is used to adjust the output level of the unit at the unbalanced outputs.
14 INPUT LEVEL meter
These LEDs provide visual indication of the peak level of the input signal when in the
Preset Select mode. For the optimal signal-to-noise ratio, it is best to adjust the input level
so that the last LED (0dB) is rarely lit. This will guard against the possibility of
overdriving the unit.
These LEDs also display the final digital mixer output levels when any other functions are
selected. This will help you to guard against clipping the output of the mixer at the digital-
to-analog converter.
15 INPUT LEVEL control
This control adjusts the unit's gain to match the signal level at the input of the Chameleon.
Use the INPUT LEVEL meter to determine the setting of this control.
16 INPUT jack
This standard, unbalanced mono 1/4" jack is used to provide input to the unit. It is front
panel mounted for easy access.