Setting hot keys – Datalogic Scanning 4420 User Manual
Page 105
Falcon Desktop Utility
Product Reference Guide
B-5
This dialog box will only open if a password was defined.
Figure B-3. Setting a Password
Table B-3. Setting a Password Dialog
Complete the
FDU Config
dialog:
1. Type in your password using either the keypad on the unit, or using
the stylus on the soft input panel (
SIP
).
If you enter an incorrect password, the system will prompt you to
input the correct one.
2. Select/tap
OK
to verify the password. Or tap
X
to
cancel.
Setting Hot Keys
You can use Hot Keys (HKeys) Tab
to associate specific
keys, such as
<F1>-
<F10>,
with specific applications. You can also create a new
Hot Key
combina-
"Adding a New Hot Key" on page
)
. Select the
HKeys
tab to access these
options.
For example, you could set
<F2>
to launch a sample application like:
\Windows\pword.exe.
Command
Description
Enter Password
Enter your password using the keypad, or using the stylus on the soft
input panel
(
SIP
)
in the text box.
OK
Select/tap
OK
to accept the password.
X
Select/tap
X
to cancel the request to start the
FDU
.