Datalogic Scanning 4420 - Manual (Page 28)

Configuring the Falcon
2-12 Falcon
®
4400 Series with Windows
®
CE
between Concurrent (the aiming beam and the illumination beam turn
on at once); and Interlaced (the aimer beam and illumination alternate
being on). Set Brightness and Timeout properties using the sliders.
Figure 2-9. Decoding Properties: Devices
• Devices : Enable the keyboard wedge for bar code scanner, Magnetic
Stripe Reader, RFID, and enable Read-Ahead for attached devices.
Bar Code Symbology Pages
Use the pull-down menus from Configure > 1D Bar Code or 2D Bar Code , or tap
the left and right arrow keys to navigate the different pages of the bar code
symbology pages. Each bar code symbology opens to its own page, as shown in
Figure 2-11 on page
2-13 .
To view other configuration options, select Configure > General from the menu