Datalogic Scanning 4420 - Manual (Page 79)

Product Reference Guide 4-1
Chapter 4
Networks, Communications,
and Connections
Overview
This section contains the following topics:
• "Installing & Setting Up Microsoft ActiveSync" starting on page 4-1 .
• "Installing Microsoft ActiveSync" on page 4-2 .
• "Setting Up ActiveSync" on page 4-4 .
• "Installing the USB Driver" on page 4-5 .
• "Using ActiveSync" starting on page 4-6 .
• "Networking" starting on page 4-8 .
• "Setting Up the Network ID" starting on page 4-8 .
• "Network and Dialup Connections" starting on page 4-9 .
• "SNMP" starting on page 4-9 .
Installing & Setting Up Microsoft ActiveSync
This section provides instructions on setting up the Host PC so that the PC
can communicate with the Falcon and the dock.
The screen shots in the manual were taken and the procedures were written using
Windows
®
XP. If you are using Windows
®
2000 or Windows
®
NT, appearances
and procedures may be slightly different.
Important! You must disconnect any other PDAs, PDTs, or Falcons using USB
ActiveSync from the Host PC prior to connecting the Falcon or the Host PC and
Microsoft ActiveSync may not recognize the new device.