Datalogic Scanning 4420 - Manual (Page 30)

Configuring the Falcon
2-14 Falcon
®
4400 Series with Windows
®
CE
• Code 39 : Select from enable, min/max lengths, enable checksum, send
checksum, and Full ASCII conversion.
• UPC-A : Select from Enable, Send Check Digit, and Send System Digit.
2D Bar Code Symbologies
If you have the 2D Imager module installed, the following additional symbol-
ogy options are also available:
Refer to Figure 2-11 for an example of the types of fields and options you can
modify.
Aztec Code OCR
Data Matrix OCR Template
Composite PDF417
Code 128
MicroPDF417
MaxiCode QR Code
See Appendix G for details on parame-
ters available for each symbology.
Other decoding parameters are described in Programming Parameters, starting
on page F-1; bar code settings are provided in Programming Bar Codes, starting
on page G-1.