Datalogic Scanning 4420 - Manual (Page 50)

Configuring the Falcon
2-34 Falcon
®
4400 Series with Windows
®
CE
Figure 2-22. Stylus Properties Control Panel
4. Tap Recalibrate to
open the Calibra-
tion screen shown
to the right
5. Carefully press and
briefly hold stylus
on the center of the
target as the target
moves around the
screen or press
<ESC> to cancel the
stylus calibration.
For more information about the touch-sensitive display, refer to “Using the
Stylus” and “Navigating the Display” in the Quick Reference Guide (QRG).