Testing the web server – Datalogic Scanning 4420 User Manual
Page 119
Testing the Web Server
Product Reference Guide
C-3
6. In the
Logon Name
dialog, type
Testuser in the
Create a new user
box, then click
Create
.The
User Manager Setup
page appears.
7. On the
User Configuration
page, type a password for
Testuser, con-
firm the password, and then click
Create Account
. The new user will
appear below the
Logon Name
box on the
User Manager Setup
page.
8. In the
User Group Setup
box, type
Testgroup in the
Create a new
group
box. Click
Create
.
9. Click
Return to user
configuration page
to return to the
User Manager
Setup
page. The new group will appear below the
Group Name
box on
the
User Manager Setup
page.
10. Click
Modify
beside the
Group Name
box containing
Testgroup.
The
Group Configuration
page appears.
11. Select the check box in the
Member of group?
column for
Testuser,
and then click
Submit Changes
.
You have now added
Testuser to the Testgroup group.
Testing the Web Server
After you have created your user accounts and groups for the Web Server, you
can test the Web Server by launching the Web Server configuration page from
a host PC. This will demonstrate that your user has been granted administra-
tive rights for the Web Server and therefore can access any virtual directory on
the Web Server.
To launch the Web Server configuration page from your host PC:
1. On the Falcon 44xx, verify that the
Connected Network
icon appears on
the taskbar. This icon indicates you are connected to the network.
2. Double-click the
Network
icon, and then select the
IP Information
tab to
obtain the Falcon’s IP address.
3. On the PC
,
launch Internet Explorer and type the following informa-
tion in the address bar:
You can also create users programmatically by calling the NTLMSetUserInfo function.
Windows CE also exposes the NTLMDeleteUser function, which is used to delete a
user from the local database, and the NTLMEnumUser function, which is used to
enumerate users in the local database.