Pilz PSSu E S 2DO 2-T - Manual (Page 13)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
3-1
3.1 Intended use
3 Safety
3 3000 Safety Safety 3- 3.1 Intended use 3100 Intended use 3- ][Gerätebeschreibung ST-Module Sys A + B
The module may be used for standard applications in system environ-
ment A and B.
][Gertebeschreibung ST-Ausgang
The module provides type 1 outputs in accordance with IEC 61131-2. It
may be used to switch:
 Resistive loads
 Inductive loads
 Capacitive loads
Bestimm_Verwend_Zusatz-(T)
The module PSSu E S 2DO 2-T is suitable for use where there are in-
creased environmental requirements (see Technical Details).
Bestimmung/Gertebeschreibung_Ausschluss
Intended use includes making the electrical installation EMC-compliant.
Please refer to the guidelines stated in the "PSSuniversal Installation
Manual". The module is designed for use in an industrial environment. It
is not suitable for use in a domestic environment, as this can lead to in-
terference.
The following is deemed improper use in particular:
 Any component, technical or electrical modification to the module
 Use of the module outside the areas described in this manual
 Use of the module outside the technical details (see chapter entitled
"Technical Details")
Bestimm_Verwend_Info_PSSu_ab_1.4.0_PAS4000_ab_1.1.1
Bestimm_Verwend_Basismodule
The PSSu E S 2DO 2 module may be used in conjunction with the fol-
lowing base modules:
Bestimm_Basismodule Digital schmal  PSSu BP 1/8S
 PSSu BP 1/8C
 PSSu BP-C 1/8S
 PSSu BP-C 1/8C
 PSSu BP 1/12S
 PSSu BP 1/12C
 PSSu BP-C1 1/12S
 PSSu BP-C1 1/12C
INFORMATION
The module is supported by
 PSSuniversal Configurator and PSSuniversal Assistant from
Version 1.4.0
 PAS4000 from Version 1.1.1
– We recommend that you always use the latest version
(download from www.pilz.de).