Pilz PSSu E S 2DO 2-T - Manual (Page 9)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
2-1
2.1 Module structure
2 Overview
2 2000 Overview Overview 2- 2.1 Module structure 2100 Module structure 2- ][BA Übersicht Aufbau
A module consists of
 Electronic module and
 Base module with
– Screw terminals or
– Cage clamp terminals
The base modules are the carrier units for the electronic modules and
are used to connect the field wiring. The electronic modules are inserted
on to the base modules and determine the module's function.
Details of the base modules that can be used are available in the chapter
entitled “Intended Use”.
2.1.1 Module features
Module features 2- Geraetemerkmale_Modul_Zusatz BA Einleitung_alt
The module has the following features:
][Merkmale_Ein_Aus ST-Ausgang  2 Digital outputs
– Semiconductor technology
– Single-pole
– Positive-switching
– Current load capacity per output: 2.00 A
– Short circuit-proof
– Overload-proof
][Merkmale_LED Ausgang  LEDs for:
– Switch status of each output
– Module error
][Merkmale_Zusatz ST-Module Sys A + B  For standard applications in system environment A and B
][Geraetemerkmal_T  Coated version of the module:
PSSu E S 2DO 2-T: for increased environmental requirements