Lenco L-90 - Manual (Page 26)

26
ESD can disturb normal usage of this turntable. If so, simply reset and restart the
device following the instruction manual. During file transmission, please handle
with care and operate in a static-free environment.
Safety instructions - continued
WARNING! NEVER INSERT AN OBJECT INTO THE PRODUCT THROUGH
THE VENTS OR OPENINGS. HIGH VOLTAGE FLOWS THRU THE PRODUCT
AND INSERTING AN OBJECT CAN CAUSE ELECTRIC SHOCK AND/OR
SHORT CIRCUIT INTERNAL PARTS. FOR THE SAME REASON, DO NOT
SPILL WATER OR LIQUID ON THE PRODUCT.
Do NOT use in wet or moist areas such as bathrooms, steamy kitchens or near
swimming pools.
Do not use this turntable when condensation may occur.
This turntable is produced according to all current safety regulations. The following
safety tips should safeguard users against careless use and dangers involved with
such use.
Although this turntable is manufactured with the utmost care, and checked several
times before leaving the factory, it is still possible that problems may occur, as
with all electrical appliances. If you notice smoke, an excessive build-up of heat or
any other unexpected phenomena, you should disconnect the plug from the main
power socket immediately.
This turntable must be well ventilated at all time!
This turntable must operate on a power source as specified on the specification
label. If you are not sure of the type of power supply used in your home, consult
your dealer or local power company.
The socket outlet must be installed near the equipment and must be easily
accessible.
Do not overload AC outlets or extension cords. Overloading can cause fire or
electric shock.
Turntables with a Class 2 power cord do not require an earthed connection.
Keep away from rodents. Rodents enjoy biting on power cords.
Always hold the plug when pulling out the plug from the main supply socket. Do
not pull the power cord. This can cause a short circuit.
Avoid placing the turntable on any surfaces that may be subject to vibrations or
shocks.
To protect the turntable during a thunderstorm unplug the AC power cable.
When the turntable is not used for long periods, unplug the AC power cable for
safety reasons.
To clean the turntable, use a soft dry cloth. Do NOT use solvents or petrol based
fluids. For stubborn stains, you may use a damp cloth with a diluted detergent.
We are not responsible for damage or lost data caused by malfunction, misuse,
modification of the device.