Lenco L-90 - Manual (Page 7)

7
Select the “Edit” menu and then “Preferences”
4. Select the USB audio device under the “Recording” selection as shown in the
example below.
5. Select “Software Playthrough” to listen to the audio while recording.
6. Press “okay” to save your settings.
7. The software is now ready to start recording.
Software Installation & Configuration (Windows 7)
1. Connect the turntable to the AC power outlet.
2. Connect the turntable to a USB socket on your computer. Wait for several
seconds until the pop-up screen appears, as shown in the example below.
3. Click on “close”.