Meters and gauges (vehicle without si-drive) – Subaru 2009 Legacy User Manual

Page 147

Advertising
background image

Black plate (150,1)

北米Model "A2450BE-A" EDITED: 2008/ 3/ 24

3-24

Instruments and controls

Meters and gauges (vehicle
without SI-DRIVE)

NOTE

Liquid-crystal displays are used in
some of the meters and gauges in the
combination meter. You will find their
indications hard to see if you wear
polarized glasses.

& Combination meter illumina-

tion

When the ignition switch is turned to the

“ON” position, the various parts of the
combination meter are illuminated in the
following sequence:
1. Combination meter dials light up.
2. Meter needles and gauge needles
each show MAX position.
3. Meter needles and gauge needles
each show MIN position.
4. Regular illumination (for driving) be-
gins.

NOTE

The above sequence of operations may
not take place if you quickly turn the
ignition switch to start the engine. This
is not an abnormality.

& Canceling the function for

meter/gauge needle move-
ment upon turning on the
ignition switch

It is possible to activate or deactivate the
movement of the meter needles and
gauge needles that takes place when the
ignition switch is turned to the

“ON”

position.
Turn the ignition switch to the

“Acc”

position. With the A trip meter indication
selected, briefly press the trip knob twice.
You can now establish the activated/
deactivated setting for movement of the
meter needles and gauge needles. To
change the current setting, press the trip
knob for at least 2 seconds.

: Activated

: Deactivated

Briefly press the knob to return to the A trip
meter indication.

If you turn the ignition switch to the

“LOCK” position, turn the ignition switch
to the

“ON” position, or open and close the

driver

’s door during the setting procedure,

the new setting will be canceled. Also, if
you do not press the trip knob for a period
of 10 seconds, the new setting will be
canceled.

NOTE

It is not possible to cancel sequential
illumination of the combination meter
while sequential illumination is actually
taking place. Cancel sequential illumi-
nation when regular illumination (for
driving) has begun.

& Speedometer

The speedometer shows the vehicle
speed.

Advertising
This manual is related to the following products: