Flat tires – Subaru 2009 Legacy User Manual

Page 329

Advertising
background image

Black plate (338,1)

北米Model "A2450BE-A" EDITED: 2008/ 3/ 24

9-4

In case of emergency

3. Put a spare fuse inside the FWD
socket located in the fuse panel and
confirm that the

” warning light on

the combination meter illuminates. The
All-Wheel-Drive capability of the vehicle
has now been deactivated.

NOTE

After reinstalling the conventional tire,
remove the spare fuse from the FWD
socket in order to reactivate All-Wheel
Drive. Make sure to restore the re-
moved spare fuse in the spare fuse
holder located in the engine compart-
ment.

Flat tires

If you have a flat tire while driving, never
brake suddenly; keep driving straight
ahead while gradually reducing speed.
Then slowly pull off the road to a safe
place.

& Changing a flat tire

WARNING

. Do not jack up the vehicle on an

incline or a loose road surface.
The jack can come out of the
jacking point or sink into the
ground and this can result in a
severe accident.

. Use only the jack provided with

your vehicle. The jack supplied
with the vehicle is designed only
for changing a tire. Never get
under the vehicle while support-
ing the vehicle with this jack.

. Always turn off the engine before

raising the flat tire off the ground
using the jack. Never swing or
push the vehicle supported with
the jack. The jack can come out
of the jacking point due to a jolt
and this can result in a severe
accident.

1. Park on a hard, level surface, when-
ever possible, then stop the engine.
2. Set the parking brake securely and
shift a manual transmission vehicle in
reverse or an automatic transmission
vehicle in the

“P” (Park) position.

3. Turn on the hazard warning flasher
and have everyone get out of the vehicle.

4. Put wheel blocks at the front and rear
of the tire diagonally opposite the flat tire.

Advertising
This manual is related to the following products: