Cd player operation – Subaru 2009 Legacy User Manual

Page 210

Advertising
background image

Black plate (215,1)

北米Model "A2450BE-A" EDITED: 2008/ 3/ 24

CD player operation

NOTE

. Make sure to always insert a disc
with the label side up. If a disc is
inserted with the label side down, the
player displays

“CHECK DISC”.

Refer to

“When the following messages

are displayed

” in this section.

. If a disc is inserted during a radio
broadcast, the disc will interrupt the
broadcast.

. After the last song finishes, the disc
will automatically return to track 1 (the
first song on the disc) and will auto-
matically play back.

. The player is designed to be able to
play music CD-Rs and music CD-RWs,
but it may not be able to play certain
ones.

. Single CDs (i.e., 8 cm/3 inch CDs)
are not supported, and if inserted, they
will be immediately ejected.

. A file (song) that is protected by a
copyright of WMA cannot be played,
and the player will skip to the next file
(song).

& How to insert a CD (type A)

Hold a disc with a finger in the center hole
while gripping the edge of the disc, then
insert it in to the slot (with the label side
up) and the player will automatically pull
the disc into position.

NOTE

DO NOT INSERT TWO DISCS INTO THE
DISC INSERTION SLOT AT A TIME.

& How to insert a CD(s) (type B)

1. Briefly press the

“LOAD” button. If the

magazine in the player has an idle
position where you can insert a disc, the
disc number indicator associated with the
idle position will blink.
If no indicator blinks, it means that there is

no idle position in the magazine.
2. When the

“LOAD” indicator flashes,

insert the disc. Once you have inserted
the disc, the

“LOAD” indicator will go off.

The disc will then be automatically drawn
in, and the player will begin to play back
the first track of the disc.

. To insert more discs in succession,
repeat Steps 1 and 2. The magazine will
be loaded with discs in ascending order of
position number.
If you do not insert any disc in 15 seconds
after you have pressed the

“LOAD” button,

the player will begin to play back the first
track of the last disc you have inserted.
. The disc indicator steadily lights up if a
disc is already inserted in the correspond-
ing position of the magazine.
. While the player is in the loading mode,
if you press the

“FM AM”, “SAT” or “AUX”

button, the player will enter the standby
mode. Press the

“CD” button to start

playback.

Audio

5-15

– CONTINUED –

5

Advertising
This manual is related to the following products: