Subaru 2009 Legacy User Manual

Page 45

Advertising
background image

Black plate (45,1)

北米Model "A2450BE-A" EDITED: 2008/ 3/ 24

catching the belt webbing in the door.
! Rear seatbelts (except rear center

seatbelt)

1. Sit well back in the seat.
2. Pick up the tongue plate and pull the
belt out slowly. Do not let it get twisted. If
the belt stops before reaching the buckle,
return the belt slightly and pull it out more
slowly. If the belt still cannot be unlocked,
let the belt retract slightly after giving a
strong pull on it, then pull it out slowly
again.

3. Insert the tongue plate into the buckle
until you hear a click.

4. To make the lap part tight, pull up on
the shoulder belt.
5. Place the lap belt as low as possible
on your hips, not on your waist.

! Unfastening the seatbelt

Push the button on the buckle.

Before closing the door, make sure that
the belts are retracted properly to avoid
catching the belt webbing in the door.
! Rear center seatbelt

1)

Center seatbelt tongue plate

2)

Connector (tongue)

3)

Connector (buckle)

4)

Center seatbelt buckle

Seat, seatbelt and SRS airbags

1-19

– CONTINUED –

1

Advertising
This manual is related to the following products: