Applied Motion ST10-Plus - Manual (Page 3)

3
ST5/10-S Hardware manual 920-0027 Rev. D
2/7/14
Introduction
Thank you for selecting an Applied Motion Products motor control. We hope our dedication to performance, qual-
ity and economy will make your motion control project successful.
If there’s anything we can do to improve our products or help you use them better, please call or fax. We’d like to
hear from you. Our phone number is (800) 525-1609, or you can reach us by fax at (831) 761-6544. You can also
email [email protected].
Features
• Microstepping digital step motor driver in compact package
• ST5 operates from a 24 to 48 volt DC power supply
• ST10 operates from a 24 to 80 volt DC power supply
• Accepts analog signals, digital signals and RS-232 serial commands
• ST5 provides motor current up to 5 amps/phase (peak of sine)
• ST10 provides motor current up to 10 amps/phase (peak of sine)
• Three digital inputs
• One digital output
• One analog input