Using the interface suite – Computronic Controls Sentinel 300P User Manual
Page 9
Advertising
SNTL300P-PCSUITE installation & operation
ci0042 p9/22 issue 5 2015-04-22
Using the Interface Suite
There are 3 modes of operation for the SNTL300P Interface Suite
Basic View Level
Engineer Level
Manager Level
CCL/Admin Level (Reserved)
Under settings/environment enter password to access either: Operator, Engineer or Admin level (see
SNTL300P
Interface Suite Environment
settings section of this document)
Should an incorrect password be entered then the system will state the following:
And limit access to View Level only
Advertising