Dish Network EZ - Manual (Page 16)

118866 15
C ONNECTING Y OUR S ATELLITE R ECEIVER , VCR,
AND TV
1. Connect a coaxial cable between the TV Set Out on
the satellite receiver and the tuner input to the VCR
(see Figure 4).
Note : If you connect your VCR a different way (for
example, using yellow, red, and white audio/video
RCA-type or S-Video cables), the feature to switch
your VCR to pass satellite programming using
will not work.
2. Look at the boxes you checked on page 8, 9,
and 11. If you checked a box next to “ 3 ,” write “ 3 ”
in the blank below. If you checked a box next to
“
4 ,” write “ 4 ” in the blank below.
Channel
3. Make sure that the switches on the back of
both your satellite receiver and your VCR are set to
the channel you wrote down in step 2.
Note : If your satellite receiver does not have a
switch, see your satellite receiver’s User’s Guide
for how to set
TV Set Out on the satellite receiver to
the channel you wrote in step 2.
4. Connect a coaxial cable between the coaxial TV
output connection on the VCR and the tuner input
to the TV.