Dish Network EZ - Manual (Page 31)

30 118866
U SING THE R EMOTE C ONTROL FOR O FF -A IR TV
P ROGRAMMING
O FF -A IR C HANNEL C ONTROL B UTTON
To use the remote control to get programs from an off-air
antenna and operate your TV, you must first press
,
which will do three things:
• Turns off the satellite receiver to pass through your
off-air antenna to your TV tuner. To watch off-air
channels, you must have an off-air antenna connected
as instructed in Setting Up
to Switch the TV to a
Preferred Off-Air Channel on page 12.
• Tunes your TV to your preferred off-air channel. This
function works only if you have completed the
instructions in Setting Up
to Switch the TV to a
Preferred Off-Air Channel on page 12.
• Makes the remote control buttons work as described
below to support off-air programming. For any of
these buttons to work, you must first have completed
the instructions in Setting Up the Remote to Control
Your TV on page 7.
POWER B UTTON
Press the POWER button to turn the TV on or off.
VOLUME B UTTON
Press these buttons to raise ( + ) or to lower ( - ) the sound
volume on the TV.
TV
VOL VOL