Dish Network EZ - Manual (Page 17)

16 118866
Figure 4. Connecting a Satellite Receiver, VCR,
and TV
S ETTING U P THE R EMOTE TO C ONTROL Y OUR VCR
1. Find the brand name of your VCR in the VCR code
tables starting on page 39. You will be referring to
this location for codes in the instructions below.
2. Turn on your VCR.
3. Press and hold until both lights turn
on (it takes about five seconds).
4. Release . light will flash.
5. Press the RECALL button. light turns on and
stays on.
6. Enter one of the three-digit codes for your VCR
from the VCR code tables while the light is
on.
Note : You have about 20 seconds to begin entering
the VCR code.
7. Press the MUTE while watching light.
Step 3
Step 1
Step 4
SAT TV
TV
TV
TV
TV