Doremi CaptiView - Manual (Page 20)

D2K.DP.000469.DRM Page 20 of 27 Version 2.1
Doremi Labs
4 Appendix A: SB430-10 Set Up Instructions
Doremi provides two hardware solutions, the AccessLink and CaptiLink, to use the CaptiView
system on Non Doremi cinema servers. Both of these products utilize the SMPTE430-10
protocol. There are two ways to set up these devices via the SMPTE430-10 protocol. The
Ethernet port is the primary way to set up the device. The secondary way is to use the serial
port, which is a backup mechanism if the Ethernet port fails or does not work properly (Figure 17
and Figure 18).
Figure 17: AccessLink
Figure 18: CaptiLink