Junger Audio d06 - Digital Audio Leveler - Manual (Page 26)

4. NETWORK INTEGRATION
operation manual d06, chapter 4 - Network Integration - page 2 of 6
A)
Connect the device via a 9 pin serial cable (connected 1 to 1) to your
PC. Start your terminal program (e.g. Start -> All Programs -> Accessories ->
Communications -> HyperTerminal).
Enter a name of your choice and press OK
Choose the communication port (physical or virtual if you are
using an USB > serial converter) you are working with
and press OK
Set the port settings as they are shown in the window above
and press OK.