KBC Networks MPEG4 Encoder User Manual
Page 18
Encoder User Manual
Manual-MPEG4_ENCA-Rev1206
Copyright © KBC Networks 2011
Page 18 of 33
www.kbcnetworks.com
3.3.3.3 PPPoE
PPPoE is used when the encoder is connected directly to the xDSL modem.
User Name: enter the user name of the xDSL account
Password: enter the password for your xDSL account.
Clicking apply will force a “Save Reboot” process.
Note:
Clicking “Apply” on this section after making changes to any of the network
information will force a “Save Reboot” prompt from the encoder.
3.3.3.4 DNS Server Setting
Primary DNS Server: defines the IP address of the primary DNS server in order to
identify the encoder by name instead of IP address.
Secondary DNS Server: Used as a fail over if the primary DNS server is not
available.
Note:
Click on “Apply” in this section of the web browser GUI to apply changes to the
DNS Server Setting.
3.3.3.5 DDNS Server Setting
DDNS Type: Enable the encoder DDNS function to connect to the encoder by
domain name even if its IP address is not static
Service ISP: Select one of the DDNS service providers
Host name: Enter the host name of your DDNS service account (example:
Yourhostid.serviceprovider.extension).
User Name: Enter the login user name your would use to access your DDNS
service account (example: Your_username)
Password: Enter the login password you would use to access your DDNS service
account.
Note:
Click on “Apply” in this section of the web browser GUI to apply changes to the
DDNS Server Setting.
3.3.4 Date Setting
The encoder can be custom configured to match the time and date of the users’
network via SNTP/NTP or manually. If your local area observes Day Light Saving,
you can program the encoder to automatically change its time when Day Light
Savings time begins and ends each year.
IP Address: Enter the IP
address of the SNTP/NTP
server.
Sync Time: Select the time
interval for the encoder to
synchronize its time.
Set Manually; Date: Select the
current date.
Set Manually; Time: Select the
current time.
Time Zone: Select the time
zone offset for local settings.
Day Light Saving; Start Time:
Select the appropriate date and
time when Day Light Savings
starts
End Time: Select the date and time when the time reverts to standard time.