KBC Networks MPEG4 Encoder - Manual (Page 19)

Encoder User Manual
Manual-MPEG4_ENCA-Rev1206
Copyright © KBC Networks 2011
Page 19 of 33 www.kbcnetworks.com
3.3.5 Video Setting
 Camera Name Enter the particular camera number or a description
such as “North Lot” or “Main Gate”.
 Streaming Method Select the desired streaming mode. The options
available are:
- TCP Only
- Multicast Only
- RTP over Multicast
- RTP over UDP & Multicast
Note: video is displayed in the encoder interface in TCP
only. All other streaming methods must be viewed via
the decoder video output.
 RTSP Authen
Enable
(appears when RTP
streaming methods
selected)
Check box to enable RTP streaming account/password
authentication
 B2 Frame Enable
(appears when RTP
streaming methods
selected)
Check box to enable the B2 frame in RTP streaming
 Audio In Select to enable the audio in, default disabled.
 Multicast IP Select the multicast IP. Default is 228.5.6.1
 Multicast TTL Select the multicast TTL. Default is 255
 IGMP
(appears only in
multicast)
Enable to use IGMP membership