KBC Networks MPEG4 Encoder - Manual (Page 23)

Encoder User Manual
Manual-MPEG4_ENCA-Rev1206
Copyright © KBC Networks 2011
Page 23 of 33 www.kbcnetworks.com
3.3.12 Event
This section identifies how the encoder will respond to trigger situations. The user
can set up to 10 Event Rules per encoder. Each rule includes one single trigger and
one of many responses. Various types of servers can be utilized in order to configure
the encoder to send a response to the desired type of server in order to receive the
trigger information. Event Configurations and the Event List also can be configured
here to further custom configure the trigger alert system. The notification message
section is where the sort of alert type can be custom designed.
3.3.13 User Account
The Root account admin has access to all GUI configuration pages and ability to
make configuration changes. All other users defined in the “User Account” list have
video display access and can see the system info as well. User 1 through User 10 do
not have access to such places as the Video Settings or WAN Settings or any place
where configurations can be altered.
Note: If the administrator account and/or password are changed, the decoder must be
given that info in its “Connection Setting” configuration page. The encoder and
decoder account and password settings do not have to match.