KBC Networks MPEG4 Encoder - Manual (Page 31)

Encoder User Manual
Manual-MPEG4_ENCA-Rev1206
Copyright © KBC Networks 2011
Page 31 of 33 www.kbcnetworks.com
7 Instruction of Disassembly
Instruction of Disassembly of KBC Product
(For EU Directive 2002/95/EEC-WEEE)
Tools required:
 No. 1 Phillips screwdriver
Steps for disassembly:
1. Remove screws from front face of encoder.
2. Slide out top lid
3. Remove screws from back end face of encoder.
4. Slide out printed circuit board (PCB).
Notice: When a product reaches the end of its life – return to KBC.