KBC Networks ESML6-FL2 - Manual (Page 25)

Ethernet Switch User Manual
Manual_sw-ESML6-FL2-Rev1106
Copyright © KBC Networks Ltd. Page 24 of 64 www.kbcnetworks.com
d) Max bridge transmit delay
Item Description
Max Bridge
Transmission
Delay
The max queuing time of frames in the switch. If enabled, a frame whose
queuing time exceeds the limit will be dropped.
Enable Delay
Bound
This sets whether the limit of queuing time for low-priority frames is enabled or
disabled. If the queuing time exceeds the limit (see Max Delay Time below) the
low-priority frames will be transmitted.
Max Delay
Time The queuing time of the low-priority frames in the switch. The default latency
time 255ms. The valid range is 0-255ms.
Table 3-7 Max Bridge Transmit Delay
3.1.3 Protocol Related Configuration
This menu options has 4 sub-menu options.
Fig 3-28 Max Bridge Transmit Delay
Fig 3-29 Protocol Related Configuration