4 console interface commands, 1 command line, 2 commands for the system configuration – KBC Networks ESML6-FL2 User Manual
Page 34
Advertising

Ethernet Switch User Manual
Manual_sw-ESML6-FL2-Rev1106
Copyright © KBC Networks Ltd.
Page 33 of 64
www.kbcnetworks.com
4 Console Interface Commands
4.1 Command Line
Switch the command from menu mode to command line.
4.2 Commands for the System Configuration
Command
Description
show ip
display the IP address, subnet mask and gateway of the switch.
config ip
configure the IP address of the switch.
config subnet
configure the subnet mask address of the switch.
config gateway
configure the gateway address of the switch.
show mac
display the MAC address.
show version
display the software version no.
show console
display the console info.
config default
load the switch defaults.
reboot
reboots the switch.
Advertising