Paxton Superchargers Ford Mustang Cobra NOVI 2000 - Manual (Page 16)

CHECK OUT PROCEDURES
We know that you are anxious to get out and drive your new vehicle, but please take a little
bit more time to perform these simple check-out steps.
Now that the work is done, it’s time to enjoy. PAXTON Automotive wants to thank you for
choosing our product, and wants to remind you that the performance and response of your
vehicle is now different that what you are used to. Please drive cautiously until you have
grown accustomed to the feel of your vehicle.
Please see the service manual included in your kit for information on the service and mainte-
nance of your PAXTON Supercharger. Belt tightening, troubleshooting, special tuning
requirements, and warranty information is also included in the Service Manual.
COPYRIGHT 2000 PAXTON AUTOMOTIVE PAGE 15
ASSEMBLY MANUAL for the
1996-98 MUSTANG COBRA
P/N 4809609
A. Inspect all wiring harnesses and electrical connections.. Make sure
that all items are properly routed, connected and secured.
B. Check all hoses, lines, and fittings for properly secured connec-
tions..
C. Make certain all fasteners, brackets, and clamps are installed and
properly tightened.
D. Check serpentine accessory belt and supercharger drive belts for
proper tension and alignment.
E. Cycle ignition key from “off” to the “on” position.
F. Check the entire fuel system for possible leaks.
G. Start engine and verify that the oil pressure is within normal range.
H. Allow the engine to come up to normal operating temperature.
I. Check the coolant level in the coolant recovery bottle and top off as
needed.
J. Check the following:
Fluid Leaks
Fluid Levels
Belt Slippage
Throttle Response