Signamax Model -065-7700 - Manual (Page 131)

Hardened Managed PoE Ethernet Switch
User’s Manual 130
LEVEL <0-100> specifies the percentage of the threshold; percentage of the
maximum speed (pps) of the interface.
4.
Example:
The following example shows setting storm-control level LEVEL (30) to the
interface fe1 (port 1):
switch_a(config)#interface fe1
switch_a(config-if)#storm-control level 30
switch_a(config-if)#
Broadcast:
1.
Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
fe1 means port 1.
The switch_a(config-if)# prompt will show on the screen.
switch_a(config)#interface fe1
switch_a(config-if)#
2.
Usage:
Use storm-control broadcast enable command to enable broadcast traffic.
Use no storm-control broadcast command to disable broadcast traffic.
3.
Command Syntax:
storm-control broadcast enable
no storm-control broadcast
4.
Example:
The following example shows setting storm-control broadcast enable to
the interface fe1 (port 1):
switch_a(config)#interface fe1
switch_a(config-if)#storm-control broadcast enable
switch_a(config-if)#
Multicast:
1.
Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
fe1 means port 1.
The switch_a(config-if)# prompt will show on the screen.
switch_a(config)#interface fe1
switch_a(config-if)#
2.
Usage: