Snmp v1/v2c – Signamax Model -065-7700 User Manual
Page 87
Hardened Managed PoE Ethernet Switch
User’s Manual 86
SNMP.
5.
Trap Community Name: For each “Trap Community Name”, Click in the
“Trap Community Name” textbox and specify a trap community name.
6.
Trap Host IP Address: For each “Trap Host IP Address”, Click in the
“Trap Host IP Address” textbox and specify a trap host IP address.
7.
Link Down Trap: Click “Link Down Trap” drop-down menu from “Link
Down Trap” drop-down list to choose “Enable” or “Disable” to enable or
disable link down trap.
8.
Link Up Trap: Click “Link Up Trap” drop-down menu from “Link Up Trap”
drop-down list to choose “Enable” or “Disable” to enable or disable link
up trap.
9.
Update Setting: Click “Update Setting” button when you finished SNMP
General Setting.
SNMP v1/v2c
1.
Get Community Name: Click in the “Get Community Name” textbox and
specify a get community name.
2.
Set Community Name: Click in the “Set Community Name” textbox and
specify a set community name.
3.
Update Setting: Click “Update Setting” button when you finished SNMP
V1/V2c Setting.