Digi Counting Version 4.0 DC-190 - Manual (Page 32)

62 DC-190 Ultra Count Installation Manual
10.11 DC-190 Ultra Count Specifications
Power
Power source 100–120VAC or 220–240 VAC at
50/60 Hz
Power consumption 20 W
Analog Specifications
Input sensitivity 0.40–4.00 mV/V
Zero adjustment range 100% FS
A/D conversion rate 10/sec
Load cell excitiation 12V DC
Load cells per scale 4 x 350Ω
Load cell connectors 2 x 14-pin Amphenol
Scale channels Up to four: three analog (load cell)
scales, plus one force balance
Weightdisplay resolution 1/10000, 1/5000, 1/2500
Counting resolution 1/1000000
Digital Specifications
Weight display 5 digits
Unit weight display 5 digits
Quantity display 7 digits
Item memory 200 items, expandable with IMS
software
Serial Communications and Setpoint Connectors
SCANNER port 8-pin DIN, RS-232C
FORCE BALANCE port 8-pin DIN, RS-232C
232C/PRINTER port 9-pin D-Sub, RS-232C
Setpoint output 8-pin mini-DIN, 24V open collector
Environmental
Operating temperature 14°F to 104°F (–10°C ° to 40°C)
Operating humidity 10% – 80% relative humidity
Physical
Bench type 16.4 in (W) x 17.1 in (D) x 4.9 in (H)
41.7 cm (W) x 43.4 cm (D) x 12.4 cm (H)
17.6 lb (8.0 Kg)
Pole type 16.4 in (W) x 16.5 in (D) x 17.9 in (H)
41.7 cm (W) x 41.9 cm (D) x 45.5 cm (H)
19.4 lb (8.8 Kg)