Digi Counting Version 4.0 DC-190 - Manual (Page 5)

4 DC-190 Ultra Count Installation Manual
1.4 DC-190 Console
Figure 1-1 shows the DC-190 console with annunciators and numeric keypad. Annunciators are described in
Section 1.4.1; Section 1.4.2 describes the DC-190 keypad.
Figure 1-1. DC-190 Keypad and Displays
1.4.1 Annunciators
Table 1-4 shows a list of the annunciators that the DC-190 uses to provide additional information about the value
being displayed. The annunciators are illuminated when the specific function is being performed.
Annunciator Annunciator Meaning
ZERO Gross weight is at center of zero
NET Display shows net weight (when tare weight is entered or recalled)
GROSS Display shows gross weight
INSUFF Net weight is below specified percentage of scale capacity
RECOM Unit weight recomputing is possible
BATT Battery power level is low
MEMORY Quantity being accumulated or memory overflow error
OUT Inventory out
IN Inventory in
UW/1000 Pcs UNIT-WEIGHT display value is equal to the weight of one piece, not 1000 pieces. Otherwise
referred to as average piece weight (A.P.W.)
MODE In programming mode
lb Item weighed in lb units
kg Item weighed in kg units
SCALE NO. (1–4) Values shown in WEIGHT, UNIT-WEIGHT, and QUANTITY displays are for indicated scale.
Table 1-4. DC-190 Panel Annunciators and Function