Adtec digital mediaHUB-HD 422 (version 1.01.10_M_2) Manual - Manual (Page 22)

Definitions
Item Function Options
API
Commands
Transport Mux
Rate
rate, in bps, that the multiplexed signal is being handed off max = 100000000
*.ECMD
TMR
Video Autofill
ties to Transport Mux Rate; uses non-audio packet space for
video On
Off
*. ECMD
VAF [x]
1 = on
0 = off
IP Destination
1-4 sub-label for items below. The sub-menu repeats four (4) times
for up to four multicasting IP destinations.
NONE none
Mode switches multicast function on and off
Off
Send *.ECMD
MMO
Multicast
Transmit IP
Address
IP Address on which a transport stream is transmitted
user-defined using
<left/right arrow> and
<select> buttons
*.ECMD MSI
Multicast
Transmit Port
port assignment used for transmitting a multicast
user-defined using
<left/right arrow> and
<select> buttons
*.ECMD
MSP
RTP
allows for sequence numbering and timing; editable if Multicast
Mode is set to 'Send' On
Off
*.ECMD RTP
TOS
Type of Service; selects the type of multicast that will forward
the packet
Normal
Minimize Cost
Maximize Reliability
Maximize Throughput
Minimize Delay
*.ECMD
TOS
TTL
Time-to-Live; specifies the number of iterations or
transmissions the packet can undergo before it is discarded
user-defined using
<left/right arrow> and
<select> buttons
*.ECMD TTL
FEC Mode
Forward Edge Correction; selects on/off. When selected,
sends two FEC RTP streams in addition to a source RTP
stream enabling a receiver to reconstruct missing packets in
the source stream. On
Off
Available if RTP selected
'on'
*.ECMD
ECR
FEC L affects the maximum burstpacket loss that can be recovered 4-20
*.ECMD
ECR
FEC D defines latency involved in burstrecovery 4-20
*.ECMD
ECR
Capture
Enable or disable encoder capture to file. If enabled, all
encoded content will be captured to file. If disabled, file capture
is turned off.
On
Off *.ECMD
CCA
www.adtecdigital.com