Adtec digital mediaHUB-HD 422 (version 1.01.10_M_2) Manual - Manual (Page 90)

SD/HD Signal Generation
SMPTE bars (requires valid HDvideo source for clock on 7712 IO sled) •
OSD
DVB Information
Service Name ◊
Service Provider ◊
Network Information (Satellite, Terrestrial, Cable) ◊
♦
ASTC Information
Name ◊
Long Name ◊
♦
•
Audio Tones
Selectable Frequency from 440hz to 6Khz ♦
Selectable Mute for L/R individually foe each of the four (4) pairs ♦
•
Encoder Video Input
Standard Definition Video Inputs (Encoder)
Analog NTSC and PAL Composite (BNC) ♦
SD-SDI (SMPTE 259M) with embedded audio (SMPTE 272M) ♦
Auto detect SD 270Mbps for SD ♦
D1 Encoding Only - no internal up-conversion. ♦
•
Standard Definition Video Pre-Processing
Encoder Filters (SD Only) ♦
Temporal and Spatial (Median) ♦
Time Base Corrector (TBC) on SDI Inputs for SD Only ♦
Chromafiltering and Scaling fo NTSC/PAL ♦
•
High Definition Video
HD-SDI input video (SMPTE 292M)w/embedded audio (SMPTE 299M) with auto-detect for HD 1.485 Gbs. ♦
•
High Definition Video Inputs (Encoder)
SDI (SMPTE 292M) with embedded audio (SMPTE 299M) - Auto detect HD 1.485 Gbs. ♦
3G-SDI input video, (SMPTE 424M) w/embedded audio (SMPTE 299M) ♦
SDI and HD-SDI are the same connector with auto standard resolution and frame rate detection. ♦
•
Audio Inputs
Analog audio input on DB15 male.
Two stereo pairs (includes 1/2 meter DB15 to 4 XLR male breakout cable) ♦
•
AES3-1 digital audio input uncompressed LPCM or compressed bit stream passthrough from external Dolby E, 5.1,
2.0 (AC3) Linear Acoustic Stream Stacker via BNC - 75 Ohm input. •
AES3-2 digital audio input uncompressed LPCM or compressed bit stream passthrough from external Dolby E, 5.1,
2.0 (AC3) Linear Acoustic Stream Stacker via BNC - 75 Ohm input. •
AES3-3 digital audio input uncompressed LPCM in - MPEG 1 Layer 2 encoding only. •
AES3-4 digital audio input uncompressed LPCM in - MPEG 1 Layer 2 encoding only. •
SDI embedded per SMPTE 272M for SD and SMPTE 299M for HD with support for up to 16 channels based on
group selection. User selectable concurrency for Groups 1 and 2 or 3 and 4 (8 channels concurrently). •
SDI Matrix (shuffle) allows selection of any pair within two groups of embedded audio to be routed to the audio
encoder or passthrough. •
User-defined analog and digital Audio level control with sample rate conversion on all four AES3, analog and
embedded SDI audio inputs. •
Audio CODEC Profiles
Dolby Digital 2.0 (AC3) Two (2) stereo encoders included •
MPEG1 Layer 2 Four (4) stereo encoders included
Support for Phase Alignment standard. ♦
•
Intelligent Dolby E, Dolby 5.1 and Dolby Digital 2.0 (AC3) LPCM (SMPTE 302M), Linear Acoustic Stream Stacker
passthrough on AES3 1, 2 and SDI •
Transport Outputs
ISO13818-1 MPEG 2 Transport Stream per EN 50083-9:1997 (188 byte only)
Three (3) mirrored outputs via BNC 75 ohm ♦
Maximum Transport Rate: 100 Mbs ♦
•
MPEG 2 Transport over IP (TSoIP?) •
www.adtecdigital.com