Adtec digital mediaHUB-HD 422 (version 1.01.10_M_2) Manual - Manual (Page 92)

MGT (TVCT) - Terrestrial or (CVCT) - Cable ♦
STT ♦
RRT ♦
EIT 0-3 ♦
For dynamic A65C PSIP use Adtec offers two options.
1) Use the DTA-3050/3051 (SMPTE 310) multiplexer and DTVGuide web hosted EIT SI Server. ♦
2) Configure the mediaHUB-HD422 to directly connect to the DTVGuide web hosted EIT server (available in
Q4 2009). ♦
•
TCP/IP, Serial, Parallel (GPIO) User Data Interfaces
IPv4 via ETH0 Fast Ethernet
SNMP/FTP/SSH/Telnet/HTTP/TSoIP ♦
•
IPv4 via ETH1 GIGE
SNMP/FTP/SSH/Telnet/HTTP/TSoIP ♦
•
Serial 1 RS232 via RJ45 Terminal, 38400-8-1-N (Full API support) •
Terminal RS232 via RJ45 Terminal, 115000-8-1-N (Full API and Linux Terminal support) •
RS422 via DB9 Female Sony 9 PIN Protocol, 38400-8-1-O
Slave, controlled by editor ♦
Master, controls deck ♦
•
Parallel (GPIO via DB9 Male)
Encode, Stop, Status, BCD IO for user defined Tally or control ♦
Full Adtec API Par Port mapping via DVC command file ♦
•
Confidence Decoder Video Output
Confidence Decode of encode via internal data bus, no ASI loop required •
SD/HD SDI SMPTE 259M (SD) and SMPTE 292M (HD)
User-definable or auto resolution from D1 to 1080i including scaler for Up and Down conversion to
confiedence-decode monitor resolution
♦
•
Composite D1 Video (NTSC/PAL)
Not concurrent with HD HDMI ♦
•
DVB-ASI Input for external SPTS or MPTS decoding
No conditional access support on Confidence Decoder- no decryption! ♦
No decoding of HD MPEG 2 422 or MPEG 4 AVC 422 video, SD MPEG 2 422 is decoded ♦
•
Confidence Decoder Audio Output
SDI Embedded audio stereo audio pair SMPTE 272M (SD), SMPTE 299M (HD) •
HDMI •
No analog audio output •
Confidence Decoder Video CODEC Profiles and Levels
MPEG 2
MP@ML , 422P@ML, MP@HL
Supports 420 for all resolutions and 422 for SD only ◊
♦
Data rates from 1 Mbs to 60 Mbs ♦
•
MPEG 4 Part 10 Advanced Video Coding (AVC)
[email protected], [email protected] ♦
•
, [email protected], HP@L4 , ! [email protected]
Supports 420 only •
Data rates from 500 kbs to 30 Mbs •
<font size="3"> Confidence Decoder Audio CODEC Profiles
Dolby Digital AC-3, Dolby 5.1 down mix to stereo, •
MPEG 1 and MPEG 2 Layer 2, •
No Dolby E support •
Physical Specifications
1 RU chassis
(19 x 14 x 1.75 in) ♦
•
www.adtecdigital.com