Adtec digital mediaHUB-HD 422 (version 1.01.10_M_2) Manual - Manual (Page 40)

Notes:
The Encode Status indicator includes a time clock showing the elapsed time the unit has been encoding. •
If a pre-defined Profile has been specified (see The Profile Tab), then the Profile's name will be displayed ("Current
Profile"). •
The small buttons in the lower right corner of each Status Display are a quick-jump feature. •
API Cross-Reference
The Status indicators displayed on the Status Window correspond with API commands that can be used to access the same
information during a Telnet session. A cross-reference is provided here.
System Status
Indicator API Command
Encode Status *.ECMD TR
Decode Status *.DCMD TR
Service Name *.ECMD SNA
Service Provider *.ECMD SPR
TransMux Rate *.ECMD TMR
Multicast *.ECMD MMO
IP:Port: *.ECMD MSI and *.ECMD MSP
FEC *.ECMD FEP
Encryption *.ECMD ECR
Video Status
Indicator API Command
Video Detected *.ECMD VDE
Video Input *.DCMD VID
SDI Passthru *.ECMD SPT
Resolution *.ECMD QV1
Codec/Chroma *.ECMD CHT
Frame Rate Part of *.ECMD QV1
Video Rate *.ECMD VRT
Audio Status
Indicator API Command
Frequency *.ECMD ASF
Audio 1 Input *.ECMD AIN 0
Audio 1 Mode *.ECMD AMO 0
Audio 1 Type *.ECMD AMO 0
Audio 1 Rate *.ECMD AMO 0
Audio 2 Input *.ECMD AIN 1
Audio 2 Mode *.ECMD AMO 1
Audio 2 Type *.ECMD AMO 1
Audio 2 Rate *.ECMD AMO 1
Audio 3 Input *.ECMD AIN 2
Audio 3 Mode *.ECMD AMO 2
www.adtecdigital.com