Adtec digital mediaHUB-HD 422 (version 1.01.10_M_2) Manual - Manual (Page 91)

Configure up to four (4) concurrent TSOIP routes
Unicast and Multicast ◊
UDP and RTP ◊
SMPTE 2022 (COP3 FEC) per route ◊
♦
MPEG 2 Transport capture to local storage or NAS
NAS optional, local storage limited to maximum transport rate of 40 Mbs ♦
•
ASI, Multiple TSoIP? and storage, operate concurrently •
Video User Data Inputs
Waveform (Composite or SD SDI)
Closed Captions per CEA-608-C (2005) ♦
Closed Captions per DVS-157 ♦
Wide Screen Signaling (WSS) per ETSI EN300294 V1.4.1 (2003-04) ♦
Teletext per ETSI EN 300 472 V1.3.1 (2003-05) ♦
AMOL ♦
•
VANC per SMPTE 291M (Native via SD/HD SDI)
Closed Captions per CEA-708 (SMPTE 291M) ♦
OP47 ♦
SMPTE 2031
VITC ◊
EBU Teletext/Subtitles ◊
WSS/Teletext/NABTS/CEA-608/TV2GX/AMOL48/96 ◊
User Defined (2031-2007) ◊
♦
•
SMPTE 2016
AFD/Bar Data/Pan Scan per CEA-CEB16 (2006) ♦
•
Waveform Conversion
CEA 608 to CEA 708
CEA-608 via Composite merged with SD/HD Video via SDI ◊
Similar frame rates required ◊
♦
•
Teletext Bridging
Waveform Teletext via Composite merged with SD/HD Video via SDI ♦
•
Wide Screen Signal Bridging
Waveform WSS via Composite merged with SD Video via SDI ♦
•
Transport Stream User Data Carriage
SCTE 127-2007 •
ETSI EN 301 775, v1.2.1 (2003-05) •
Conditional Access
BISS 0 (free to air) •
BISS 1 •
BISS E
Mode 1/2 ♦
•
Table Compliance
MPEG Program Specific Information (PSI) Table Compliance:
PAT ♦
CAT ♦
PMT ♦
SCTE 35 Ad Insertion Que ♦
•
DVB Service Information (SI) Static Table Compliance (dynamic option)
SDT ♦
NIT ♦
EIT ♦
TDT/TOT ♦
•
For dynamic DVB-SI use, Adtec offers two options:
1) Use the DTA-3050 multiplexer and DTVGuide web hosted EIT SI Server. Optionally if subscriber management is
required, a local DTVManage server can proxy the DTVGuide data as needed. ♦
2) Configure the mediaHUB-HD422 to directly connect to the DTVGuide web hosted EIT server (available in Q4
2009). ♦
•
ATSC A65B (PSIP) static table compliance (Dynamic Option) •
www.adtecdigital.com