Adtec digital mediaHUB-HD 422 (version 1.01.10_M_2) Manual User Manual
Page 38
The C&C Screen has two operating windows, the Status Bar and the Main Window:
Status Window: the Status Window is fixed- it will display regardless of what function is being displayed in the Main Window.
The current parameters of the unit's encode, decode, and transport functions are always in view and are updated in real time.
Further detail about the Status Window is covered in a later section of this manual. The Status Window also features "Jump
Buttons" that serve as a second way to access associated Menu Tabs.
Main Window: the Main Window is used to access the device's controls and operating settings. The Main Menu Tabs
determine which function is being controlled in the Main Window. Each Main Menu Tab is covered in more detail in further
sections of this manual.
Important Note for mediaControl Users
Adtec's mediaControl software interface is not supported on the mediaHub HD 422's firmware and will not interface with the
unit at all.
www.adtecdigital.com