Artesyn MVME8100/MVME8110 Installation and Use (September 2014) - Manual (Page 35)

Hardware Preparation and Installation
MVME8100 / MVME8110 Installation and Use (6806800P25G) 35
Prior to installing PMC modules on the MVME8100 / MVME8110 baseboard, ensure that all
switches that are user configurable are set properly. To do this, refer to
Figure 2-1 or the board
itself, for the location of specific switches and set the switches according to the following
descriptions.
Figure 2-1 Switch Locations (ENP1 board)
S5 Switch
S2 Switch
S3 Switch
S4 Switch