2 booting from an optional sata drive, 3 booting from a usb drive – Artesyn MVME8100/MVME8110 Installation and Use (September 2014) User Manual
Page 97
Boot System
MVME8100 / MVME8110 Installation and Use (6806800P25G)
97
5.3.2
Booting from an Optional SATA Drive
1.
Make sure that the
kernel, dtb,
and
ramdisk
are saved in the SATA drive with ext2
partition.
2. Configure U-Boot environment variable:
setenv File_uImage <kernel_image>
setenv File_dtp <kernel dtb>
setenv File_ramdisk <ramdisk>
saveenv
3. Copy the files from the SATA drive to the memory:
# option: scsi - interface, 0:1 - device 0 partition 1
ext2load scsi 0:1 1000000 $File_uImage
ext2load scsi 0:1 2000000 $File_ramdisk
ext2load scsi 0:1 f00000 $File_dtp
4. Boot the Linux in memory.
bootm 1000000 2000000 f00000
5.3.3
Booting from a USB Drive
1.
Make sure that the
kernel, dtb
, and
ramdisk
are saved in the USB drive with FAT
partition.
2. Configure the U-Boot environment variable:
setenv File_uImage <kernel_image>
setenv File_dtp <kernel dtb>
setenv File_ramdisk <ramdisk>
saveenv
3.
Initialize USB drive:
usb start
4. Load the files from the USB drive to the memory:
# option: usb - interface, 0:1 - device 0 partition 1
fatload usb 0:1 1000000 $File_uImage
fatload usb 0:1 2000000 $File_ramdisk
fatload usb 0:1 f00000 $File_dtb
5. Boot the Linux in memory:
bootm 1000000 2000000 f00000