ATEIS DIVA8G2 - Manual (Page 251)

System Functionality 251
© 2012 ATEÏS
As opposed to the Attack time, the Release time is the amount of time for which the signal have
to stay under the threshold point before deactivation of the Mic/Line sources. A correct Release
Time can avoid inopportune deactivation of the music source (pause in speech). The release
time can be set from 0 ms to 5000 ms.
Setting those parameter correctly needs some experience, so be careful and please test it to learn more
about the behaviour of this option.
Once your modulation detection parameters are adjusted, you have to edit the advance setting for the
Mic/Line, please refer to the
Use Mic/Line Input general chapter.
5.7.2.2 From Logic Input
Mic/Line routing can be operate by external trigger, that means with the help of the logic, evacuation or
even external fault inputs. In order to access the logic inputs menu, go on menu View -> Logic Inputs.
The Logic Inputs page will pops up, see below.
To learn more about the Logic inputs, see How to Use Logic Inputs.
The idea is to use logical trigger to start an event. Event type for operation on Mic/Line are listed below.
You can find more information on those events in the chapter
How To Use Events.
Mic/Line Paging Event
In order to associate a event to a logic input trigger, click on the "Start" button under "Event Setting".
The Events Selection window will be open, see below.