ATEIS DIVA8G2 - Manual (Page 261)

System Functionality 261
© 2012 ATEÏS
To access the PEQ on inputs, go on the DSP configuration window.
There is two ways to access the PEQs on amplifier outputs, by double clicking the amplifier icon (Voice
Amp and Music Amp) on the Master window, or directly by the DSP Configuration window.
On Inputs
To add PEQ on an input, drag and drop the PEQ from the filter menu in the Design Component
Section.
Note: if there is already hi/lo pass filtering on the same input, you won't be able to add PEQ on
that input. On one input, you only have one filter location and can use either PEQ or Hi/Lo Pass
filtering.
Double Click on the PEQ icon to enter the PEQ window, see below.