Avalon Firestyles 796-1990 to 1993 - Manual (Page 63)

Page 63
REPLACEMENT PARTS AND REMOVAL INSTRUCTIONS
(Continued)
Removing and Replacing the Firebricks (Continued)
REMOVING THE BAFFLE (TOP) FIREBRICKS AND COMPONENTS (Continued)
7. To re-
assemble the
baffle
firebricks,
follow the
removal
instructions in
reverse order.
When
inserting the
ceramic
blanket, make
sure it lines
up and is flat
before
installing the
ceramic
blanket
holder.
Remove the ceramic
blanket holder by pulling it
forward and rotating it
downwards and out the
door.
Baffle
Support
Angle
Remove each of the baffle
firebricks in the order listed here.
Push each firebrick from below so
the front comes off of the baffle.
Then slide it to the side and
towards the front between the
space between the baffle and the
top of the firebox. Slide the center
three firebricks to the side before
removing in the same fashion.
Remove the ceramic
blanket by CAREFULLY
pulling it out of the slot
between the baffle and
the door. Use both hands
and an even pulling action
to prevent tearing.
3
1
4
5
2
REMOVING THE SIDE AND BACK FIREBRICKS
1. Make sure the appliance is cool and
cleaned out.
2. Follow the directions for removing the
baffle (top) firebricks. The back edge of
the top firebricks rest on the firebricks at
the back of the firebox and must be
removed prior to removing the side and
back firebricks.
3. Remove the back firebricks in the order
listed in the illustration to the right (bricks
1 through 5).
4. If the side firebricks (bricks 6 through 9 in
the illustration to the right) need removal,
first remove the back firebricks, then
follow the directions for removing the
floor firebricks. The side firebricks are
removed by pivoting them out from the
bottom.
5
6
7
8 4
3
2
1
9
Cut Brick (Only
1 1/2" Wide)