BECKHOFF EP1xxx - Manual (Page 14)

Product overview
2.4 EP1098­0001
2.4.1 EP1098 ­ Introduction
Fig. 6: EP1098­0001
8 digital inputs, 24 V
DC
, negative switching
The EP1098 EtherCAT Box modules with digital inputs acquire binary control signals from the process level,
and transfer them, electrically isolated, to the controller.
The status of the signal is displayed by light emitting diodes. The signal connection is made through M8
connectors (EP1098 ­0001) or M12 connectors (EP1098 ­0002).
The sensors are supplied from the control voltage Us. The load voltage Up is not used in the input module,
but may be connected in order to be relayed downstream.
Quick links
Installation
UL Requirements for UL approved modules
EP1xxx 14 Version 2.1.0