BECKHOFF AX5000 1,5 A - 40 A - Manual (Page 23)

BECKHOFF Drive Technology 4 Product description
AX5000 Version : 4.6 23
4.7 Overview of connectors/terminal points
4.7.1 X01 - wide voltage input
Terminal point
Connection Tightening
torque 3-phase 1-phase
L1 Phase L1 Phase L1
0,5 -0,6 Nm
L2 Phase L2 not used
L3/ N Phase L3 Neutral conductor
PE Protective conductor
4.7.2 X02 - DC link (AX5101 - AX5125 und AX520x)
Terminal point Connection Tightening
torque
DC+ DC link + external brake resistor
and drive system
0,5 -0,6 Nm
DC – DC link –
4.7.3 X02 - DC link (Only AX5140)
Terminal point Connection Tightening
torque
DC+ DC link +
only for drive system 1,2 -1,5 Nm
DC – DC link –
WARNING
Serious risk of injury through high electrical voltage!
890 V DC voltage at the DC link terminals. Dangerous voltage may be
present for 5 minutes after the device is switched off.
Remove the connector only if you want to build a drive system with a AX-
Bridge.
Remove the white hexagon plugs only if you wire the terminal points again.
4.7.4 X03 - 24 V
DC
supply
Terminal
point
Connection Current
consumption
Tightening
torque
U
p
+ 24 V
DC -0/+25%
- periphery
(e.g. separate braking
voltage)
Depending on the
connected consumers
(see X06 and X14,X24)
0,5 – 0,6 Nm U
s
+ 24 V
DC ±25%
- system
supply (depending on
rated current)
-12 A = 0.4 A – 0.8 A
18 A - 25A = 1,1 A
40 A = 1,6 A
GND GND